Trang 1 của 2 12 CuốiCuối
Kết quả 1 đến 15 của 16

Chủ đề: Octoplus JTAG PRO Software Updates New

  1. #1
    Thành Viên Nhiệt Tình toilatoi142001's Avatar
    Ngày tham gia
    Jun 2013
    Bài viết
    480
    Like bài viết
    0
    Được like: 49 trong 24 bài viết

    Octoplus JTAG PRO Software Updates New


    Octoplus JTAG PRO Software v.1.0.7 is out! 🐙


    Octoplus Box JTAG PRO Software v.1.0.7 Release Notes:
    🐙 Added ability to edit CID registry (Device identification register) for Samsung eMMC flash chips
    🐙 Added ability to configure eMMC bus frequency
    🐙 Added support for the following models via eMMC:

    • LG P715 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG D605 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG D325 (Hynix) - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG D625 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG H734 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    🐙 Firmware of Octoplus box has been updated! To update the firmware, please connect the box and only then run the Software
    🐙 All pinouts and repair procedures described in the manual ("Help" button in the Software)

    More info and discussion are HERE
    ___________________________________
    WBR,
    Octoplus Box Team







    Tìm thêm kết quả:
    Chủ đề đang được nhiều người quan tâm::
    toilatoi142001@yahoo.com 0979.273.573:0933.090.445:092.444.0137 AGRIBANK CỦ CHI:6120205234525

  2. Có 1 người đã cảm ơn toilatoi142001 cho bài viết hay:


  3. #2
    Thành Viên Nhiệt Tình toilatoi142001's Avatar
    Ngày tham gia
    Jun 2013
    Bài viết
    480
    Like bài viết
    0
    Được like: 49 trong 24 bài viết

    Tiêu Đề: Octoplus JTAG PRO Software Updates New


    Octoplus JTAG PRO Software v.1.1.0 is out! 🐙


    Octoplus Box JTAG PRO Software v.1.1.0 Release Notes:
    🐙 Added support for the following models via eMMC:

    • LG LS990 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG D724 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG D821 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    🐙 Added operation ETA information (Estimated Time of Accomplishment) to status bar
    🐙 Reduced font size of log window messages
    🐙 All pinouts and repair procedures described in the manual ("Help" button in the Software)

    More info and discussion are HERE
    ___________________________________
    WBR,
    Octoplus Box Team
    toilatoi142001@yahoo.com 0979.273.573:0933.090.445:092.444.0137 AGRIBANK CỦ CHI:6120205234525

  4. #3
    Thành Viên Nhiệt Tình toilatoi142001's Avatar
    Ngày tham gia
    Jun 2013
    Bài viết
    480
    Like bài viết
    0
    Được like: 49 trong 24 bài viết

    Tiêu Đề: Octoplus JTAG PRO Software Updates New


    Octoplus JTAG PRO Software v.1.1.1 is out! 🐙


    Octoplus Box JTAG PRO Software v.1.1.1 Release Notes:
    🐙 Added support for the following models via eMMC:

    • Samsung GT-N7100 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Prestigio PAP5400 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG D690 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    🐙 Box firmware has been updated! To update the firmware, it is necessary to connect the box in first place and only then run the Software.
    🐙 Improved performance of Write process on Samsung and Hynix eMMCs.
    🐙 All pinouts and repair procedures described in the manual ("Help" button in the Software)

    More info and discussion are HERE
    ___________________________________
    WBR,
    Octoplus Box Team
    toilatoi142001@yahoo.com 0979.273.573:0933.090.445:092.444.0137 AGRIBANK CỦ CHI:6120205234525

  5. #4
    Thành Viên Nhiệt Tình toilatoi142001's Avatar
    Ngày tham gia
    Jun 2013
    Bài viết
    480
    Like bài viết
    0
    Được like: 49 trong 24 bài viết

    Tiêu Đề: Octoplus JTAG PRO Software Updates New


    Octoplus Box JTAG PRO Software v.1.1.2 is out! 🐙


    Octoplus Box JTAG PRO Software v.1.1.2 Release Notes:

    🐙 Added support for the following models via eMMC:

    • LG F460K - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung GT-N8000 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SGH-I527M - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files.
    • Samsung GT-I9205 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-G357FZ - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    🐙 All pinouts and repair procedures described in the manual ("Help" button in the Software)


    More info and discussion are HERE
    ___________________________________
    WBR,
    Octoplus Box Team
    toilatoi142001@yahoo.com 0979.273.573:0933.090.445:092.444.0137 AGRIBANK CỦ CHI:6120205234525

  6. #5
    Thành Viên Nhiệt Tình toilatoi142001's Avatar
    Ngày tham gia
    Jun 2013
    Bài viết
    480
    Like bài viết
    0
    Được like: 49 trong 24 bài viết

    Tiêu Đề: Octoplus JTAG PRO Software Updates New


    Octoplus Box JTAG PRO Software v.1.1.3 is out 🐙


    Dear Octoplus community,
    Today we are proud to introduce you a whole new built-in module - the 'Content Extractor'!
    This update drastically increases your servicing possibilities, offering such new features as restoring customers data from water drown phones, raw binary forensics and so on and so on, via JTAG or eMMC connection using simple graphical interface! Supporting most of existing file system formats and model-independent it brings a real boost to your repair shop


    Octoplus Box JTAG PRO Software v.1.1.3 Release Notes:
    • Content Extractor – New Possibilities:


    1. View and save (extract) data (files, directories and volumes) directly from the device trough eMMC or/and JTAG interface
    2. View and save (extract) data (files, directories and volumes) from binary dumps (with Full Flash), which have been read from the device
    3. All popular file systems are supported: ext2, ext3, ext4, NTFS, FAT
    4. Ability to save selected files, directories and volumes on user’s hard drive
    5. Easy extract, view and save contacts
    6. Easy extract, view and save pictures
    7. Easy extract, view and SMS messages
    8. Preview graphic files (and their cache)
    9. Ability to work with pictures and media files using computer’s operation system
    10. Advanced search:
      - Search files in file systems or in binary dumps of the device
      - Search user’s contacts or SMS messages
      - Search file name of found pictures
    11. Easy and intuitive graphical user interface (GUI)
    • Improved connection via eMMC interface.
    • Uploaded improved SRF for H345 into the Supprot Area.
    • Box firmware has been updated! To update the firmware, it is necessary to connect the box and only then run the Software.


    You wanted – you got it! Please feel free to leave your suggestions and feedback HERE
    __________________________________________
    WBR,
    Octoplus Box Team
    toilatoi142001@yahoo.com 0979.273.573:0933.090.445:092.444.0137 AGRIBANK CỦ CHI:6120205234525

  7. #6
    Thành Viên Nhiệt Tình toilatoi142001's Avatar
    Ngày tham gia
    Jun 2013
    Bài viết
    480
    Like bài viết
    0
    Được like: 49 trong 24 bài viết

    Tiêu Đề: Octoplus JTAG PRO Software Updates New


    Octoplus JTAG PRO Software v.1.1.4. LG Factory Repair feature has been released!🐙


    Octoplus Box JTAG PRO Software v.1.1.4 Release Notes:

    🐙 Added LG Factory Repair feature!
    ....You can try to repair LG devices via eMMC by using original LG firmware * («*.tot", "*.kdz" and "*.dz" versions of firmware are supported!).
    ....This feature can be useful in case, if you haven’t got the working device to prepare Repair file or haven’t got a chance to read out Full flash; or device you want to repair currently is not supported.

    🐙 Fixed and improved Content Extractor.
    ....- Fixed GUI delay while analyzing contacts, SMS and pictures.
    ....- Fixed issue with contacts’ export to VCF file.
    ....- Increased stability of FS analysis.
    ....- Increased speed of FS reading and parsing directly from the device.

    🐙 Added Win XP SP3 support (in test mode).

    🐙 Made some GUI changes.

    🐙 Updated repair file for LG LS991 (please re-download SRF file).

    🐙 All pinouts and repair procedures described in the manual ("Help" button in the Software)

    * NOTE: not all versions of firmware contain necessary partitions for repairing! Try to write different firmware.

    More info and discussion are HERE
    __________________________________________
    WBR,
    Octoplus Box Team
    toilatoi142001@yahoo.com 0979.273.573:0933.090.445:092.444.0137 AGRIBANK CỦ CHI:6120205234525

  8. #7
    Thành Viên Nhiệt Tình toilatoi142001's Avatar
    Ngày tham gia
    Jun 2013
    Bài viết
    480
    Like bài viết
    0
    Được like: 49 trong 24 bài viết

    Tiêu Đề: Octoplus JTAG PRO Software Updates New


    Octoplus JTAG PRO v.1.1.8 - LG G3, Samsung Galaxy Grand, Galaxy Note and more! 🐙


    Octoplus JTAG PRO Software v.1.1.8 is out!

    We have added support for LG G3, Samsung Galaxy Grand, Samsung Galaxy Note, Samsung Galaxy S III.

    Octoplus Box JTAG PRO Software v.1.1.8 Release Notes:
    🐙 Added support for the following models via eMMC:

    • LG D855 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung GT-I9082 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung GT-I9228 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung GT-N7000 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SCH-I535 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    🐙 Added UFS support via ADB interface (Read necessary device partitions, Read Full Flash, Read Custom Flash (with the required size))
    🐙 All pinouts and repair procedures described in the manual ("Help" button in the Software)
    More info and discussion are HERE
    ________________________________________
    WBR,
    Octoplus Box Team
    toilatoi142001@yahoo.com 0979.273.573:0933.090.445:092.444.0137 AGRIBANK CỦ CHI:6120205234525

  9. #8
    Thành Viên Nhiệt Tình toilatoi142001's Avatar
    Ngày tham gia
    Jun 2013
    Bài viết
    480
    Like bài viết
    0
    Được like: 49 trong 24 bài viết

    Tiêu Đề: Octoplus JTAG PRO Software Updates New


    Octoplus JTAG PRO v.1.1.9 - Galaxy S5, J3, Grand Prime and more! 🐙


    Octoplus Box JTAG PRO Software v.1.1.9 Release Notes:
    🐙 Added support for the following models via eMMC:

    • Samsung SM-G531F - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-G900J - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-G900H - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-J320P - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung GT-I8258 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SCL23 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    🐙 Fixed parsing of some TOT files (*.tot)
    🐙 All pinouts and repair procedures described in the manual ("Help" button in the Software)

    More info and discussion are HERE
    _______________________________________________
    WBR,
    Octoplus Box Team
    toilatoi142001@yahoo.com 0979.273.573:0933.090.445:092.444.0137 AGRIBANK CỦ CHI:6120205234525

  10. #9
    Thành Viên Nhiệt Tình toilatoi142001's Avatar
    Ngày tham gia
    Jun 2013
    Bài viết
    480
    Like bài viết
    0
    Được like: 49 trong 24 bài viết

    Tiêu Đề: Octoplus JTAG PRO Software Updates New


    Octoplus JTAG PRO v.1.2.0 - check this out! 🐙


    Octoplus Box JTAG PRO Software v.1.2.0 Release Notes:
    🐙 Added support for the following models via eMMC:

    • LG H845 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG LS770 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG VS810PP - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-G530H - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    🐙 Uploaded new SRF for LG LS996 «LG_LS996_EMMC_BGND3R_ZV7_5.1.1.SRF»
    🐙 Updated pinouts in old SRF for LG LS996 - please uninstall old SRF («Uninstall custom model file(s)» button at «Welcome» tab in the software) and download new «G_LS996_EMMC_BGND3R_ZV4.SRF» («Download *.srf» button)
    🐙 All pinouts and repair procedures described in the manual ("Help" button in the software)
    Please pay attention! As you may have noticed, there is a minor issue with early Medusa PRO boxes firmware update. For those who have troubles with updating their box firmware version to 1.11 we introduce the so called "compatibility mode" - possibility to use all the latest software versions with old box firmware, but sacrificing some firmware-based improvements.

    When you run software 1.2.0 for the first time it will attempt to update your box firmware to 1.11 if needed. If it fails to do so you will see "box status: not found" message.

    To switch the software to "compatibility mode" do the following:
    1. Close Medusa PRO software
    2. Reconnect the box
    3. Launch 1.2.0 software again

    Also, keep in mind that non-updatable boxes are covered with warranty and entitled for replacement by authorized resellers.

    More info and discussion are HERE
    _________________________________________
    WBR,
    Octoplus Box Team
    toilatoi142001@yahoo.com 0979.273.573:0933.090.445:092.444.0137 AGRIBANK CỦ CHI:6120205234525

  11. #10
    Member
    Ngày tham gia
    Sep 2016
    Bài viết
    49
    Like bài viết
    44
    Được like: 5 trong 5 bài viết

    Tiêu Đề: Octoplus JTAG PRO Software Updates New


    Thanks anh đã chia sẻ !

  12. #11
    Thành Viên Nhiệt Tình toilatoi142001's Avatar
    Ngày tham gia
    Jun 2013
    Bài viết
    480
    Like bài viết
    0
    Được like: 49 trong 24 bài viết

    Tiêu Đề: Octoplus JTAG PRO Software Updates New


    Octoplus JTAG PRO v.1.2.1 - MTK repair, deleted data recovery and many more!! 🐙


    With this Software update we are glad to present new advanced features and support of new devices.
    On your numerous requests, we have released feature of repairing devices, which are based on MediaTek CPUs using scatter!
    Also added new eMMC functionality - «Boot partition enable» and for Samsung eMMC flash chips - «Remove write protect» and «eMMC geometry edit».
    In addition, added support for new Samsung, LG, Lenovo, Alcatel and Oppo devices.


    Octoplus Box JTAG PRO Software v.1.2.1 Release Notes:
    🐙 Added «Repair devices based on MediaTek CPU's using scatter» feature!
    With this feature you can repair different devices via eMMC, which are based on MediaTek CPUs.
    Old and new scatter formats are supported.

    To repair such devices, you should perform the next steps:


    I. If device eMMC is not damaged

    1. Solder the necessary eMMC wires
    2. Connect the device
    3. Go to «Factory Repair» tab in the Software
    4. Press «Repair devices based on MediaTek CPU's using scatter» button
    5. Select proper scatter and necessary files
    6. Press «Write partitions» button
    7. Device repair is done

    II. If device eMMC is damaged

    If eMMC chip is damaged, you can replace it to similar Samsung eMMC chip.
    You should have CID and know properties (Boot1, Boot2, RPMB partitions’ sizes) of eMMC, which you want to replace.



    1. Connect Samsung eMMC to Box (via soldering eMMC wires or via eMMC adapter)
    2. Press «eMMC geometry edit» button, enter necessary Boot1, Boot2, RPMB partitions’ sizes and set them
    3. Write proper CID of eMMC, which you want to replace
    4. Go to «Factory Repair» tab in the Software
    5. Press «Repair devices based on MediaTek CPU's using scatter» button
    6. Select proper scatter and necessary files
    7. Press «Write partitions» button
    8. After writing will be complete, replace device’s eMMC chip to programmed Samsung eMMC
    9. Assemble the device and power it on. Device repair is done

    🐙 Added «Remove write protect» feature for Samsung eMMC flash chips
    🐙 Added «eMMC geometry edit» feature for Samsung eMMC. With this option you can set Boot1, Boot2, RPMB partitions’ size for Samsung eMMC
    🐙 Added «Boot partition enable» - you can set, whether the device is not boot enabled or select partition, that will be enabled for boot (partition1, partition2 or User area)
    🐙 Added support for the following models via eMMC:

    • Samsung GT-I9060I - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-G531H - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG F460K, F460L, F460S - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (Thanks to Mr. Hoayeu105 aka AquaSta)
    • Alcatel One Touch 4030 - Read/Write/Erase, Easy Repair, Constructor for Repair Files
    • Lenovo P780 - Read/Write/Erase, Easy Repair, Constructor for Repair Files
    • Lenovo A390 - Read/Write/Erase, Easy Repair, Constructor for Repair Files
    • Lenovo S820 - Read/Write/Erase, Easy Repair, Constructor for Repair Files
    • Lenovo A1000F - Read/Write/Erase, Easy Repair, Constructor for Repair Files
    • Oppo T29 - Read/Write/Erase, Easy Repair, Constructor for Repair Files
    🐙 Added support for the following models via USB
    (note: these devices are already supported via USB in old Medusa Software, they are just revised and added to Medusa Pro Software):

    • LG D160 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG D280N - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG D320N - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG D410 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    🐙 Improved erase operation (now it is up to 200 times faster)
    🐙 Fixed some issues with CID edit
    🐙 New features and improvements in "Content Extractor":

    • added possibility of restoration of deleted data (files, folders)! To find deleted data, select «Show deleted data» option in «Content Extractor» window and parse (read) data from device or file. Note: unfortunately, not all deleted data can be undeleted.
    • fixed errors with searching and displaying data
    • improved cashing process for video-files (in «Search media» window)
    • added more criteria for inner media-files search
    • fixed issue with window's hanging after some device been connected
    • fixed some GUI problems
    🐙 Box firmware has been updated! To update firmware, it is necessary to connect the Box and only then run the Software
    Please pay attention! As you may have noticed, there is a minor issue with early Medusa PRO boxes firmware update.
    Non-updatable boxes are covered with warranty and entitled for replacement by authorized resellers.
    It will be not possible to use new eMMC feature («eMMC geometry edit», «Boot partition enable», «Remove write protect») without updating Box firmware!
    🐙 All pinouts and repair procedures described in the manual ("Help" button in the software)

    More info and discussion are HERE
    _______________________________________________
    WBR,
    Octoplus Box Team
    toilatoi142001@yahoo.com 0979.273.573:0933.090.445:092.444.0137 AGRIBANK CỦ CHI:6120205234525

  13. #12
    Thành Viên Nhiệt Tình toilatoi142001's Avatar
    Ngày tham gia
    Jun 2013
    Bài viết
    480
    Like bài viết
    0
    Được like: 49 trong 24 bài viết

    Tiêu Đề: Octoplus JTAG PRO Software Updates New


    Octoplus JTAG PRO v.1.2.2 - 'Box not connected' fix and more! 🐙


    Dear Medusa Pro Box users,

    Due to some architecture bug in MCU we use and our firmware particularities many of you may have encountered "Box not connected" issue and total incapability to repair phones via eMMC interface. Today we are glad to announce that the solution has been found. In discussion thread you will find a tutorial on how to repair this problem, in somewhat unusual manner though


    Also added support for HTC Desire 601, LG Nexus 5x, Samsung Galaxy J3, Galaxy S3 Progre, Lenovo IdeaTab!

    Octoplus Box JTAG PRO Software v.1.2.2 Release Notes:

    🐙 Added support for the following models via eMMC:

    • HTC Desire 601 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG H790 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-J320H - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SCL21 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Lenovo A3000F - Read/Write/Erase, Easy Repair, Factory Repair (via scatter), Constructor for Repair Files

    🐙 Updated help and pinouts in Smart Repair File for LG MS345 (please re-download SRF).

    🐙 Improved showing of progress status while writing scatter firmware of MediaTek based devices.

    🐙 Fixed “Cancel” operation for process of writing scatter firmware.

    🐙 Improvements in "Content Extractor":

    • Improved process of searching contacts
    • Improved exporting of contacts - added UTF-8 support while exporting into text formats


    🐙 Some GUI changes.

    🐙 Firmware of Medusa Pro Box has been updated! To update the firmware, please connect the box and only then run the Software. Also you can update box firmware via “Update Box Firmware” button at “Welcome” tab in Software.

    🐙 All pinouts and Repair procedures are described in Software manuals ("Help" button in Software).

    More info and discussion are HERE
    _______________________________________________
    WBR,
    Octoplus Box Team
    toilatoi142001@yahoo.com 0979.273.573:0933.090.445:092.444.0137 AGRIBANK CỦ CHI:6120205234525

  14. #13
    Thành Viên Nhiệt Tình toilatoi142001's Avatar
    Ngày tham gia
    Jun 2013
    Bài viết
    480
    Like bài viết
    0
    Được like: 49 trong 24 bài viết

    Tiêu Đề: Octoplus JTAG PRO Software Updates New


    Octoplus JTAG PRO v.1.2.3 - FRP reset via eMMC and more! 🐙


    Octoplus Box JTAG PRO Software v.1.2.3 Release Notes:
    🐙 Added Reset FRP lock («Reset FRP» button at «Factory repair» tab in Software) for Qualcomm-based devices. With this option you can Reset FRP via eMMC connection
    🐙 Released Box firmware v.1.14. In this firmware version fixed Read/Write operations for Hynix and old Samsung eMMC flash chips. Also improved connection procedure for 4-bit Bus Mode and improved stability
    🐙 Improved Erase operation (now even more faster) while erasing selected partition(s)
    🐙 Improvements in «Partition Manager»:

    • Added Status Bar (Speed, Progress, ETA)
    • Fixed error with saving selected partitions as «*.mpt»
    🐙 Some GUI changes
    🐙 All pinouts and Repair procedures are described in Software manuals ("Help" button in Software)
    Note! After repairing box firmware you shouldn’t use previous versions of Octoplus Box JTAG PRO Software, please always use the latest actual software version.

    More info and discussion are HERE
    ________________________________________________
    WBR,
    Octoplus Box Team
    toilatoi142001@yahoo.com 0979.273.573:0933.090.445:092.444.0137 AGRIBANK CỦ CHI:6120205234525

  15. #14
    Thành Viên Nhiệt Tình toilatoi142001's Avatar
    Ngày tham gia
    Jun 2013
    Bài viết
    480
    Like bài viết
    0
    Được like: 49 trong 24 bài viết

    Tiêu Đề: Octoplus JTAG PRO Software Updates New


    Octoplus JTAG PRO v.1.2.6 is out! 🐙


    Octoplus Box JTAG PRO Software v.1.2.6 Release Notes:
    🐙 Released support for "Qualcomm MSM8x26" cores (new USB loader added). Read/Write/Full Erase operations are supported.
    🐙 Added support for the following models via USB:

    • LG H962 - Read/Write/Erase Full, Easy Repair, Partition Manager, Constructor for Repair Files.
    • LG K420N - Read/Write/Erase Full, Easy Repair, Partition Manager, Constructor for Repair Files.
    • LG D290N - Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files.
    • LG D380* - Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files.
    🐙 Added support for the following models via eMMC:

    • LG D290N - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files.
    • Samsung SM-J700H - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files.
    • Huawei G526-L11 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files.
    🐙 All pinouts and Repair procedures described in the manual ("Help" button in the software).
    * This device is already supported via USB in old Medusa Software, it is just revised and added to Medusa Pro Software.

    More info and discussion thread are HERE
    __________________________________________________ _______
    WBR,
    Octoplus Box Team
    toilatoi142001@yahoo.com 0979.273.573:0933.090.445:092.444.0137 AGRIBANK CỦ CHI:6120205234525

  16. #15
    Thành Viên Nhiệt Tình toilatoi142001's Avatar
    Ngày tham gia
    Jun 2013
    Bài viết
    480
    Like bài viết
    0
    Được like: 49 trong 24 bài viết

    Tiêu Đề: Octoplus JTAG PRO Software Updates New


    Octoplus JTAG PRO Software v.1.2.8 is out! 🐙


    Added support via USB for LG D390N, LG H525N, LG VS986W and
    support for Samsung SM-T310, LG D390N, LG H410 and LG P895 via eMMC.
    Uploaded new “Live logs” into the Support Area.


    Octoplus Box JTAG PRO Software v.1.2.8 Release Notes:
    🐙 Added support for the following models via USB:

    • LG D390N - added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG H525N - added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG VS986W - added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    🐙 Added support for the following models via eMMC:

    • Samsung SM-T310 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG D390N - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG H410 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG P895 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    🐙 New features and improvements in «Content Extractor»:

    • Added view of deleted data in contacts and SMS DBs ("Show unallocated data" button)
    • Improved media files recognition in supported FS
    🐙 Uploaded new “Live logs” into the Support Area
    🐙 All pinouts and repair procedures described in the manual ("Help" button in the software)

    More info and discussion are HERE
    _______________________________________________
    WBR,
    Octoplus Box Team
    toilatoi142001@yahoo.com 0979.273.573:0933.090.445:092.444.0137 AGRIBANK CỦ CHI:6120205234525

Trang 1 của 2 12 CuốiCuối

Quyền viết bài

  • Bạn Không thể gửi Chủ đề mới
  • Bạn Không thể Gửi trả lời
  • Bạn Không thể Gửi file đính kèm
  • Bạn Không thể Sửa bài viết của mình
  •  
free counters