Trang 2 của 2 Đầu tiênĐầu tiên 12
Kết quả 16 đến 30 của 30

Chủ đề: Octoplus JTAG PRO Software Updates New

  1. #16
    Thành Viên Nhiệt Tình toilatoi142001's Avatar
    Ngày tham gia
    Jun 2013
    Bài viết
    483
    Like bài viết
    0
    Được like: 52 trong 26 bài viết

    Tiêu Đề: Octoplus JTAG PRO Software Updates New


    Octoplus JTAG PRO Software v.1.2.9 is out! 🐙


    Dear friends!

    We wish you and your family a sweet and beautiful New Year! Let this time bring happiness, love, and prosperity to your home and life.
    May every day of the new year bring pleasant events, satisfaction from your achiements, new horizons, and happiness!
    Thank you for every day out of 365 days we’ve spent together. Be sure we will further please you with new regular updates!

    Please note, that we will be on holidays from December 29th till January 3rd. All support issues will be postponed during this period. See you next year!

    Octoplus Box Team


    Octoplus JTAG PRO Software v.1.2.9 is out!


    Released new Samsung eMMC features: «Smart Report», «Factory Format», «Write CSD», «Write/Update firmware»).
    Released writing firmware via USB for devices, based on Qualcomm CPUs (Qualcomm raw images with «rawprogram0.xml», «patch0.xml»).


    Octoplus Box JTAG PRO Software v.1.2.9 Release Notes:

    🐙 Added new features for Samsung eMMC chips:

    • Samsung Smart Report
      This feature shows extended info (check state) of Samsung eMMC chip such as:
      number of eMMC banks, initialization bad block count, optimal trim size and other information.


    • Samsung eMMC Factory Format
      This feature is intended to format Samsung eMMC chips.
      Note, that after performing Factory Format operation all eMMC data will be erased!


    • Samsung eMMC Write CSD
      This feature allows you to write data to CSD register in Samsung eMMC chips.


    • Samsung eMMC Write/Update firmware
      This feature allows you to update/write eMMC firmware on Samsung eMMC chip.
      If eMMC is not connected in Normal (General) Mode, to write eMMC firmware you should force it into Boot Mode using TestPoint.
      With this update we have added support and firmware for the following Samsung eMMC chips:

      - KMVTU000LM-B503 [VTU00M]
      - KMN5U000ZM-B203 [N5U00M]
      - KMKJS000VM-B309 [KJS00M]
      - KMK5U000VM-B309 [K5U00M]
      - KMJJS000WM-B409 [JJS00M]
      - KLMCG8GE4A-A001 [MCG8GA]
      - KLM8G1WE4A-A001 [M8G1WA]
      List of supported Samsung chips will expand in future software updates.

      To write/update firmware in mentioned above eMMC chips, do the following:
      1. Select «eMMC» interface option
      2. Select «Brand: eMMC_chips»
      3. Select eMMC chip part number in «Model:» software list
      4. Press «Help» button to view eMMC pinout and TestPoint picture. Acknowledge the manual.
      5. Solder all necessary wires to connect eMMC (if necessary, solder TP wire to force eMMC into Boot Mode, Product name will be displayed as 000000)
      6. Press «Connect» button to connect eMMC (if necessary, connect TP to GND)
      7. When connection is successful, release (disconnect) TP wire from GND and go to «eMMC service» tab in the software
      8. Press «Write/Update firmware» button, select proper eMMC chip from the list and press "Write/Update eMMC firmware" button



      NOTE: PLEASE DON’T SELECT INCORRECT eMMC (WITH NON MATCHING PART NUMBER)! WRITING INCORRECT FIRMWARE WILL DAMAGE YOUR EMMC!
    🐙 Box firmware has been updated! To update firmware automatically, it is necessary to connect the Box and only then run the software.
    Also, you can update Box firmware manually via «Update Box Firmware» button at «Welcome» tab in Octoplus JTAG PRO software.

    Note, it won't be possible to use mentioned above Samsung eMMC features without updating Box firmware!
    🐙 Released writing factory firmware via USB for devices, based on Qualcomm CPUs.

    This feature («Repair devices based on Qualcomm CPU’s using XML files (*.xml)») allows you to Repair/Write factory firmware on devices,
    based on Qualcomm CPUs using firmware with «rawprogram0.xml» and «patch0.xml».
    To make Repair/Write firmware, do the following:
    1. Connect the device to PC in «Qualcomm…9008…» Mode. If necessary, use TP
    2. Select «USB» interface option
    3. Select «Brand: Custom Setting»
    4. Select proper «Device (Core)»
    5. Select proper Qualcomm loader in «Loader» list
    6. Press «Connect» button and wait while device will be connected
    7. Go to «Factory repair» tab
    8. Press «Repair devices based on Qualcomm CPU’s using XML files (*.xml)» button
    9. Select «rawprogram0.xml» and «patch0.xml» files
    10. Press «Write» button to write selected firmware

    Note: some firmware’s XML may contain «modemst1» and «modemst2» partitions for writing.
    Writing of these partitions may lead to loosing phone’s IMEI and calibration data.
    Software will automatically deselect and skip writing of these partitions. If you need to write these partitions, you should manually select (check) them and confirm writing.
    Also, software will automatically make backup (read) these partitions form the phone to «Backup» folder before writing firmware.
    🐙 Added possibility to make Repair or Write flash without write data verification («Write data verification» option).
    To make Smart Repair/Factory Repair/Write flash without write data verification, do the following:
    connect the device, deselect (uncheck) «Write data verification» option in the software and perform Smart Repair/Factory Repair/Write flash operation.
    🐙 Made some GUI changes.
    🐙 All pinouts and repair procedures described in the manual ("Help" button in the software)
    Also, we have improved routines of Sony phones connection, based on Qualcomm MSM7225A via Octoplus JTAG PRO Box
    and we have uploaded «Octoplus JTAG Installer 1.9.5.1» into the Support Area and Octoplus Box site.


    More info and discussion are HERE
    ________________________________________________
    WBR,
    Octoplus Box Team
    toilatoi142001@yahoo.com 0979.273.573:0933.090.445:092.444.0137 AGRIBANK CỦ CHI:6120205234525

  2. #17
    Thành Viên Lâu Năm
    Ngày tham gia
    Jun 2013
    Bài viết
    479
    Like bài viết
    0
    Được like: 13 trong 10 bài viết

    Tiêu Đề: Octoplus JTAG PRO Software Updates New


    Octoplus JTAG PRO v.1.4.2 software is out! 🐙



    Octoplus JTAG PRO v.1.4.2 is out! New models and USB loaders were added!

    Added support via eMMC for Asus Zenfone 6 (T00G), Huawei ALE-L21, Samsung SM-G386F, Samsung SM-J106F, Samsung SM-J120F, Samsung SM-J321AZ, Samsung GT-I9190, Samsung GT-I9192 and support via USB for Alcatel OneTouch POP 3 5065D, Alcatel OneTouch Idol 3 6039Y, Alcatel OneTouch Idol 3 6045I, Asus ZenFone Selfie (Z00UDB), Vivo Y51L, ZTE Z9 (NX508J)!

    Added general Qualcomm USB loaders for MSM8909, MSM8917, MSM8926, MSM8928, MSM8936, MSM8916, MSM8976, MSM8994, MSM8996.

    Uploaded new “Live logs” into the Support Area.

    Some adjustments and improvements were made.

    Octoplus JTAG PRO Software v.1.4.2 Release Notes:
    🐙 Added support for the following models via eMMC:

    • Asus Zenfone 6 (T00G) – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Huawei ALE-L21 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-G386F – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-J106F – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-J120F – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-J321AZ – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung GT-I9190 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung GT-I9192 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    🐙 Added support for the following models via USB:

    • Alcatel OneTouch POP 3 5065D – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Alcatel OneTouch Idol 3 6039Y – Write, Easy Repair, Partition Manager, Constructor for Repair Files
    • Alcatel OneTouch Idol 3 6045I – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Asus ZenFone Selfie (Z00UDB) – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Vivo Y51L – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • ZTE Z9 (NX508J) – Write, Easy Repair, Partition Manager, Constructor for Repair Files
    🐙 Added 15+ general Qualcomm USB loaders for MSM8909, MSM8917, MSM8926, MSM8928, MSM8936, MSM8916, MSM8976, MSM8994, MSM8996. Read/Write/Full Erase operations are supported.
    🐙 Improved communication in ADB connection Mode
    🐙 Uploaded SRF for HTC D820U (OPFJ100) into the Support Area (“USER UPLOADED SRF” folder) (thanks to Mr. rohit.sharma73)
    🐙 Uploaded new “Live logs” into the Support Area
    🐙 Some changes were made in log information
    🐙 All pinouts and Repair procedures described in the manual ("Help" button in the software)

  3. #18
    Thành Viên Lâu Năm
    Ngày tham gia
    Jun 2013
    Bài viết
    479
    Like bài viết
    0
    Được like: 13 trong 10 bài viết

    Tiêu Đề: Octoplus JTAG PRO Software Updates New


    Octoplus JTAG PRO v.1.4.3 - added Motorola Factory Repair and more! 🐙



    Octoplus JTAG PRO v.1.4.3 is out!

    Added Factory Repair (Boot) for Motorola devices, based on Qualcomm CPUs.

    Added support for Motorola XT1021, Motorola XT1030, Motorola XT1032, Motorola XT1034, Motorola XT1541, Motorola XT1064, Motorola XT1097 and Microsoft Lumia 535 (RM-1090) via eMMC.

    Added new general Qualcomm USB loaders for MSM8909, MSM8936, MSM8974, MSM8994, MSM8996.

    Uploaded new “Live logs” into the Support Area.

    Octoplus JTAG PRO Software v.1.4.3 Release Notes:

    🐙 Motorola Factory Repair feature has been released.

    You can try to repair boot on Motorola devices, based on Qualcomm CPUs, via eMMC by using original Motorola firmwares (firmwares with “*.xml”).
    This feature can be useful if you don’t have the same working device to prepare Boot Repair file or device you want to repair currently is not supported. Note, device should have non-damaged CID partition, otherwise it could cause problems with writing firmware after repairing. We recommended making backup of CID partition before repairing. Also, software will automatically try to detect and backup (read) CID partition from the phone to “Backup” folder after connecting.

    🐙 Added support for the following models via eMMC:

    • Motorola XT1021 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Motorola XT1030 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Motorola XT1032 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Motorola XT1034 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Motorola XT1541 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Motorola XT1064 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Motorola XT1097 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Microsoft Lumia 535 (RM-1090) – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files

    🐙 Box firmware has been updated to 1.21 version! In this firmware version we have improved eMMC Read/Write operations.
    To update firmware automatically, it is necessary to connect the Box and only then run the software.
    Also, you can update Box firmware manually via “Update Box Firmware” button at the “Welcome” tab in Octoplus JTAG PRO software.

    🐙 Released Pause/Resume operations in Download Manager (“Download *.srf” button in the Software)

    🐙 Uploaded new “Live logs” into the Support Area

    🐙 All pinouts and Repair procedures are described in the manual ("Help" button in the Software)


  4. #19
    Thành Viên Lâu Năm
    Ngày tham gia
    Jun 2013
    Bài viết
    479
    Like bài viết
    0
    Được like: 13 trong 10 bài viết

    Tiêu Đề: Octoplus JTAG PRO Software Updates New


    Octoplus JTAG PRO v.1.4.4 - many new phones and features! 🐙



    Octoplus JTAG PRO v.1.4.4 is out!

    Added support for Huawei G6-U10, Lenovo ZUK Z1, Xiaomi Redmi 4A via USB; support for Sony C6603, Sony C6903, Sony D2203, Sony E2312, Samsung SM-G532G, LG P765 via eMMC and support for Nokia Lumia 1020 (RM-875) via JTAG.

    Improved Factory Repair (Boot) operation for Motorola devices, based on Qualcomm CPUs.

    We made improvements in Download Manager ("Download *.srf" button in Software) - from now on you can download files in separate window, so you can work with devices while selected files are being downloaded.

    Uploaded new “Live logs” into the Support Area.

    Octoplus JTAG PRO Software v.1.4.4 Release Notes:


    • Added support for the following models via USB:


    • Huawei G6-U10 – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Lenovo ZUK Z1 – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Xiaomi Redmi – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Added support for the following models via eMMC:


    • Sony C6603 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Sony C6903 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Sony D2203 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Sony E2312 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-G532G – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG P765 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Added support for the Nokia Lumia 1020 via JTAG:


    • Nokia Lumia 1020 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Improved Factory Repair (Boot) operation for Motorola devices, based on Qualcomm CPUs


    • Made improvements in Download Manager ("Download *.srf" button in Software) - from now on you can download files in separate window, so you can work with devices while selected files are being downloaded.


    • Box firmware has been updated to 1.22 version. In this firmware version we have improved connection for some eMMC device.
      To update firmware automatically it is necessary to connect the Box and only then run the software.
      Also, you can update Box firmware manually via “Update Box Firmware” button in “Welcome” tab of Octoplus JTAG PRO software.


    • Uploaded SRFs for Samsung SM-G318H and ZTE L5 Plus into the Support Area (“USER UPLOADED SRF” folder) (thanks to Mr. help-mi)


    • Uploaded new “Live logs” into the Support Area


    • All pinouts and Repair procedures are described in the manual ("Help" button in the software)




  5. #20
    Thành Viên Lâu Năm
    Ngày tham gia
    Jun 2013
    Bài viết
    479
    Like bài viết
    0
    Được like: 13 trong 10 bài viết

    Tiêu Đề: Octoplus JTAG PRO Software Updates New


    Octoplus JTAG PRO v.1.4.5 - many new phones added! 🐙



    Octoplus JTAG PRO v.1.4.5 is out! New models added!

    Added support for LG LS450, LG LS675, LG V520, Samsung SM-J100VPP, Samsung SM-J120A, Samsung SM-J3110, Samsung SM-G386W, Samsung SM-P605, Samsung GT-N7105, HTC One SV C520e (PL80130) and Prestigio PSP 3504 DUO via eMMC.

    Uploaded new “Live logs” into the Support Area.

    Octoplus JTAG PRO Software v.1.4.5 Release Notes:
    🐙 Added support for the following models via eMMC:

    • LG LS450 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG LS675 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG V520 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-G386W – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-J100VPP – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-J120A – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-J3110 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung GT-N7105 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-P605 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • HTC One SV C520e (PL80130) – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Prestigio PSP 3504 DUO – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. help-mi)
    🐙 Uploaded new “Live logs” into the Support Area
    🐙 Improved operation logging
    🐙 Uploaded new eMMC (ISP) pinout picture for another PCB revision of SM-j320F into the Support Area (thanks to Mr. rebainoor)
    🐙 All pinouts and Repair procedures are described in the manual ("Help" button in the software)

  6. #21
    Thành Viên Lâu Năm
    Ngày tham gia
    Jun 2013
    Bài viết
    479
    Like bài viết
    0
    Được like: 13 trong 10 bài viết

    Tiêu Đề: Octoplus JTAG PRO Software Updates New


    Octoplus JTAG PRO v.1.4.6 - massive update! 🐙



    Octoplus JTAG PRO v.1.4.6 is out! New models, USB loaders and features added!

    Added support for Samsung SM-J111M, Samsung SM-J320M, Samsung SM-G361H, Samsung SM-G531H/DS, Samsung GT-I9295, Samsung SM-N900J, Samsung SM-T567V, HTC Desire 616, Sony E6553 via eMMC and support for LG H440N and Huawei Y625-U32 via USB!

    Added General Qualcomm USB loaders for MSM8x26, MSM8929, MSM8940, MSM8953, MSM8992

    Added more than 35 unique Qualcomm USB loaders for different vendors' devices

    Added possibility to select external Qualcomm USB loader!

    Improvements in Content Extractor - added possibility of manual scanning (parsing) data from file or from connected via eMMC device

    Uploaded new “Live logs” into the Support Area.

    Octoplus JTAG PRO Software v.1.4.6 Release Notes:
    🐙 Added support for the following models via eMMC:

    • Samsung SM-J111M – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-J320M – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. JSOUZA)*
    • Samsung SM-G361H – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-G531H/DS – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. HELP-MI)*
    • Samsung GT-I9295 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-N900J – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-T567V – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • HTC Desire 616 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Sony E6553 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. TREJO1998)*
    🐙 Added support for the following models via USB:

    • LG H440N – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. CYKADA)*
    • Huawei Y625-U32 – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. REBAINOOR)*
    * SFR files created by users are uploaded into “USER UPLOADED SRF” folder of the Support Area
    🐙 Added General Qualcomm USB loaders for MSM8x26, MSM8929, MSM8940, MSM8953, MSM8992. Read/Write/Full Erase operations are supported
    🐙 Added more than 35 unique Qualcomm USB Loaders for different vendors' devices (Read/Write/Full erase operations are supported):

    • Xiaomi – added loaders for MSM8916, MSM8917, MSM8936, MSM8937, MSM8953, MSM8976, MSM8992, MSM8996
    • Vivo – added loaders for MSM8917, MSM8937, MSM8953, MSM8976, MSM8996
    • Nokia – added loaders for MSM8937 and MSM8998
    • Oppo – added loader for MSM8937
    • ZTE – added loader for MSM8996

    🐙 Added possibility to select external Qualcomm USB loader! From now on you can select external Qualcomm USB loader ("*.mbn», "*.bin", "*.elf") to connect the device via USB. This feature will be useful, if built-in USB loaders are not compatible with your device, or necessary loader is not included in the Software.

    To select external USB loader, do the following: select "USB" option in Software, select "Brand: Custom Settings", select "Device (Core): Custom Loader" and press “Connect” button to select loader and connect the device. Don't forget to put the device into "Qualcomm...9008" mode before.
    🐙 Improvements in "Content Extractor":

    • Added possibility of manual scanning (parsing) data from file or from connected via eMMC device. From now on you can select method that will be used for parsing folders and data – “Full Scan” or “Manual Scan”. “Full Scan” will parse all folders and data and may take 0-1-2 hours. If you don’t need to scan (parse) all data and wait long time, you can use "Manual Scan" method, which allows you to select a folder to parse and scanning process takes only few seconds. Just press "Read from file…” or “Read from device” button and select method for data scanning (parsing).
    🐙 Uploaded new “Live logs” into the Support Area
    🐙 All pinouts and Repair procedures are described in the manual ("Help" button in the software)

  7. #22
    Thành Viên Lâu Năm
    Ngày tham gia
    Jun 2013
    Bài viết
    479
    Like bài viết
    0
    Được like: 13 trong 10 bài viết

    Tiêu Đề: Octoplus JTAG PRO Software Updates New


    Octoplus JTAG PRO v.1.4.7 is out! 🐙



    Octoplus JTAG PRO v.1.4.7 is out! New models added!

    Added support for Samsung SM-J710FN, Samsung SM-G600FY, Samsung SM-P555, Samsung GT-P3100, Samsung SM-T211, Samsung SM-T285, Samsung SM-T285YD, Samsung SM-T331, Samsung SM-T377P, Samsung SM-T535, Samsung SM-T555, Lenovo P700i via eMMC and support for Huawei Y560-l01 via USB.

    Some adjustments and improvements were made.

    Uploaded new “Live logs” into the Support Area.

    Octoplus JTAG PRO Software v.1.4.7 Release Notes:
    🐙 Added support for the following models via eMMC:

    • Samsung SM-J710FN – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-G600FY – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-P555 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung GT-P3100 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-T211 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-T285 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-T285YD – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-T331 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-T377P – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-T535 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-T555 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Lenovo P700i – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. help-mi)*
    🐙 Added support for the following models via USB:

    • Huawei Y560-l01 – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. rebainoor)*
    * SFR files created by users are uploaded into “USER UPLOADED SRF” folder of the Support Area
    🐙 Added operations progress bar (for main window operations) on PC task bar
    🐙 Improved writing of system partition/data in Samsung Factory Repair operation (thanks to Mr. andrei_d1978)
    🐙 Improvements in Download Manager - added possibility to select and download all files from the Support Area
    🐙 Improved Reset FRP operation for connected via eMMC Qualcomm CPUs-based devices
    🐙 Fixed issue of check boxes blinking in interface selection
    🐙 Fixed issue of Software hangup/crashing after write error arising in Smart/Factory Repair operation
    🐙 Uploaded new “Live logs” into the Support Area
    🐙 All pinouts and Repair procedures are described in the manual ("Help" button in the software)

  8. #23
    Thành Viên Lâu Năm
    Ngày tham gia
    Jun 2013
    Bài viết
    479
    Like bài viết
    0
    Được like: 13 trong 10 bài viết

    Tiêu Đề: Octoplus JTAG PRO Software Updates New


    Octoplus JTAG PRO v.1.4.8 is out! 🐙



    Octoplus JTAG PRO v.1.4.8 is out! New models added!

    Added support for Samsung SM-J320A, Samsung SM-G750A, Samsung SCH-I605, Samsung SGH-I317, Samsung SHV-E270S via eMMC and support for Alcatel OT-4060A, Alcatel OT-5054O and Alcatel OT-6055U via USB.

    Many improvements and new possibilities.

    Uploaded new “Live logs” into the Support Area.

    Octoplus JTAG PRO Software v.1.4.8 Release Notes:
    🐙 Added support for the following models via eMMC:

    • Samsung SM-J320A - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-G750A - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SCH-I605 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SGH-I317 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SHV-E270S - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files

    🐙
    Added support for the following models via USB:

    • Alcatel OT-4060A - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Alcatel OT-5054O - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Alcatel OT-6055U - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files

    🐙
    Added possibility to select any SRF manually after device connecting (from now on “Smart repair” button is always active after successful device connecting).

    🐙
    Added new USB loaders for Qualcomm MSM8952 CPU for Alcatel devices.

    🐙
    Improvements on “Boot operation mode” tab:

    • During “Boot operation mode” installation next to “Partition config” and “Boot bus config” register drop-down lists you may now see the final value of these registers (in Hex and Bin formats).
    • Added operation with H/W reset function [RST_N_FUNCTION] register.

    🐙
    Improvements when outputting information to Software log:

    • Added showing of sizes (capacities) of partitions when connecting eMMC.
    • Added possibility of showing the partition table (start address, length) in Hex values. To do this, it is necessary to select option “Partition info in Hex address” at “Welcome” tab of Software.
    • Added possibility of clearing Software log by pressing right mouse button.

    🐙
    Improved “Factory Repair” operation and searching of “Build info” for Samsung devices, based on TI OMAP 4430 CPU (thanks to andrei_d1978).

    🐙
    Improvements in Download Manager - added possibility to select and download group of files (select files by vendor) from the Support Area.

    🐙
    Uploaded new SFR for Huawei Y530-U00 into the Support Area.

    🐙
    Uploaded new “Live logs” into the Support Area.

    🐙
    All pinouts and Repair procedures are described in the manual ("Help" button in the software).

  9. #24
    Thành Viên Lâu Năm
    Ngày tham gia
    Jun 2013
    Bài viết
    479
    Like bài viết
    0
    Được like: 13 trong 10 bài viết

    Tiêu Đề: Octoplus JTAG PRO Software Updates New


    Octoplus JTAG PRO v.1.4.9 is out! 🐙



    Octoplus JTAG PRO v.1.4.9 is out! New models and features added!

    Added support for LG LS740 and Samsung SM-G800F via eMMC and support for Alcatel OT-5051D, Alcatel OT-5051X, Alcatel OT-5056E, Alcatel OT-6044D, Lenovo K33a48, Lenovo P1a42, Lenovo P2c72, Lenovo ZUK Z2 Z2131 and ZTE N939Sc via USB.

    Changes and improvements in Partition Manager were made.

    New Qualcomm USB loaders added.

    Uploaded new “Live logs” into the Support Area.

    Some adjustments and improvements were made.

    Octoplus JTAG PRO Software v.1.4.9 Release Notes:
    🐙 Added support for the following models via eMMC:

    • LG LS740 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-G800F – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    🐙 Added support for the following models via USB:

    • Alcatel OT-5051D – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Alcatel OT-5051X – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Alcatel OT-5056E – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Alcatel OT-6044D – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Lenovo K33a48 – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Lenovo P1a42 – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Lenovo P2c72 – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Lenovo ZUK Z2 Z2131 – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • ZTE N939Sc – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    🐙 Added new Qualcomm USB loaders for the next devices (Read/Write/Full erase operations are supported):

    • Huawei - for MSM8936 and MSM8952
    • ZTE - for MSM8936, MSM8952, MSM8953, MSM8976, MSM8994 and MSM8996
    🐙 Improved procedures of sending USB loaders and connecting
    🐙 Changes and improvements in Partition Manager

    • "Open File" button allows you to open full flash file, red from phone (img file), select required partitions and write them to the phone, or select any file instead of partition in table, which will be written accordingly to partitions table; also you can select a file which contains only partitions table and then select files corresponding to each partition in table. If eMMC chip is not connected - read/write operations are not available
    • "Connect" button from now on connects target device, but doesn't read partitions table. It will change its state to "Read from device", what allows you to perform partitions search, parsing and further operations in designated window, if eMMC chip is connected properly
    • While eMMC chip is connected, "Save partitions" reads data from memory, "Write partitions" writes present partitions accordingly from image or files opened
    • You have to reconnect target device after each write operation to see the changes. "Disconnect" button added for this purpose
    • "Hex editor" allows to change data directly in memory or file opened, accordingly to selected target
    🐙 Some log changes were made.
    🐙 Uploaded new “Live logs” into the Support Area.
    🐙 All pinouts and Repair procedures are described in the manual ("Help" button in the software).

  10. #25
    Thành Viên Lâu Năm
    Ngày tham gia
    Jun 2013
    Bài viết
    479
    Like bài viết
    0
    Được like: 13 trong 10 bài viết

    Tiêu Đề: Octoplus JTAG PRO Software Updates New


    Octoplus JTAG PRO v.1.5.0 is out! New models and USB loaders added!

    Added support for Alcatel 5025D, Lenovo S860, Samsung SM-J110H, ZTE A510 via eMMC and support for Artel GM 4G, Asus Z010DA, Asus ZE550KL, LG M700, Vivo Y55A via USB.

    New Qualcomm USB loaders added.

    Uploaded new “Live logs” into the Support Area.

    Some adjustments and improvements were made.

    Octoplus JTAG PRO Software v.1.5.0 Release Notes:


    🐙 Added support for the following models via eMMC:

    • Alcatel 5025D – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. help-mi)*
    • Lenovo S860 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. help-mi)*
    • Samsung SM-J110H – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • ZTE A510 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. help-mi)*
    🐙 Added support for the following models via USB:

    • Artel GM 4G – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. QobilbekRishtan)*
    • Asus Z010DA – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Asus ZE550KL – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG M700 – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Vivo Y55A – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    🐙 Added 15+ new Qualcomm USB loaders for the following devices (Read/Write/Full erase operations are supported):

    • Asus - for MSM8916, MSM8929, MSM8937, MSM8939
    • LG - for MSM8937
    • Moto - for MSM8996
    • ZTE - for MSM8996
    • ZUK - for MSM8996
    • Xiaomi - for MSM8998, SDM660
    * SFR files created by users are uploaded into "USER UPLOADED SRF" folder of the Support Area.


    🐙 Added new generic (common) Qualcomm USB loaders for MSM8917 and SDM660.

    🐙 Improved procedures of sending USB loaders.

    🐙 Some adjustments and improvements were made.

    🐙 Uploaded new “Live logs” into the Support Area.

    🐙 All pinouts and Repair procedures are described in the manual ("Help" button in the software).


  11. #26
    Thành Viên Lâu Năm
    Ngày tham gia
    Jun 2013
    Bài viết
    479
    Like bài viết
    0
    Được like: 13 trong 10 bài viết

    Tiêu Đề: Octoplus JTAG PRO Software Updates New


    Octoplus JTAG PRO v.1.5.1 is out! New models and features added!

    Added support for Samsung SM-J210F, Samsung SM-G386T, Samsung SM-G530T, LG M700TV, ASUS MeMO Pad FHD 10 (ME302KL), HTC One M9 (0PJA200), Motorola XT1723, ZTE Z667 via eMMC and support for Xiaomi Redmi Note 4X and Xiaomi Redmi 5A via USB.

    Uploaded new “Live logs” into the Support Area.

    Some adjustments and improvements were made.

    Octoplus JTAG PRO Software v.1.5.1 Release Notes:
    🐙 Added support for the following models via eMMC:

    • Samsung SM-J210F – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-G386T – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-G530T – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG M700TV – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. Burini)
    • HTC One M9 (0PJA200) – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • ASUS MeMO Pad FHD 10 (ME302KL) – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. ZELEKXXX)
    • Motorola XT1723 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • ZTE Z667 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    🐙 Added support for the following models via USB:

    • Xiaomi Redmi Note 4X – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Xiaomi Redmi 5A – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. ZELEKXXX)
    🐙 Added possibility of work with devices via “USB” interface without Medusa/Medusa Pro/Octoplus Box connected to PC (card should be connected).
    🐙 Some changes added to Partition Manager (added possibility to open and write “*.mpt” files).
    🐙 Improved procedure of USB loaders operation.
    🐙 Some adjustments and improvements were made.
    🐙 Uploaded new “Live logs” into the Support Area.
    🐙 All pinouts and Repair procedures are described in the manual ("Help" button in the software).

  12. #27
    Thành Viên Lâu Năm
    Ngày tham gia
    Jun 2013
    Bài viết
    479
    Like bài viết
    0
    Được like: 13 trong 10 bài viết

    Tiêu Đề: Octoplus JTAG PRO Software Updates New


    Octoplus JTAG PRO v.1.5.2 is out! New models and USB loaders added!

    Added support for LG LS775, LG H700, Samsung GT-I9200, Sony F3311 via eMMC and support for Asus Z00UDB, LG K371, Xiaomi Redmi Note 5a, Xiaomi Redmi Note 5a Prime, Xiaomi Mi5X (A1), Xiaomi Redmi 5A and ZTE Axon A1 via USB.

    Added general (common) Qualcomm USB loaders for MSM8917 and MSM8940.

    Added more than 20 unique Qualcomm USB loaders for different vendors' devices.

    Uploaded new “Live logs” into the Support Area.

    Some adjustments and improvements were made.

    Octoplus JTAG PRO Software v.1.5.2 Release Notes:


    • Added support for the following models via eMMC:


    • LG LS775 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG H700 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung GT-I9200 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Sony F3311 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files

    • Added support for the following models via USB:


    • Asus Z00UDB – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG K371 – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Xiaomi Redmi Note 5a – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Xiaomi Redmi Note 5a Prime – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Xiaomi Mi5X (A1) – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Xiaomi Redmi 5A – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • ZTE Axon A1 – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files

    • Added more than 20 unique Qualcomm USB Loaders for different vendors' devices (Read/Write/Full erase operations are supported):


    • Alcatel - added loaders for MSM8909, MSM8916, MSM8929
    • Asus - added loader for MSM8916
    • Coolpad - added loaders for MSM8929 and MSM8936
    • Lenovo - added loaders for MSM8x26
    • QCT - added loader for MSM8x10
    • WING - added loader for MSM8x10
    • ZTE - added loader for MSM8974


    • Added general (common) Qualcomm USB loaders for MSM8917 and MSM8940.


    • Improved procedure of USB loaders operation.


    • Some adjustments and improvements were made.


    • Uploaded new “Live logs” into the Support Area.


    • All pinouts and Repair procedures are described in the manual ("Help" button in the software).




  13. #28
    Thành Viên Lâu Năm
    Ngày tham gia
    Jun 2013
    Bài viết
    479
    Like bài viết
    0
    Được like: 13 trong 10 bài viết

    Tiêu Đề: Octoplus JTAG PRO Software Updates New


    Octoplus JTAG PRO v.1.5.4 is out! New eMMC firmwares, new models and USB loaders added!


    Another massive update is here! Our engineers team keeps working hard to empower your favourite tool with new possibilities and assure you bigger efficiency.


    Added “eMMC Write/Update firmware” for the range of new Samsung eMMC chips.

    Added support for Haier W716, LG D722V, Motorola XT1550, Motorola XT1562, Samsung SM-G532M, Sony F3111 via eMMC and support for Alcatel 5054N, Alcatel 6055D, Huawei Nexus 6, Vivo Y66 and ZTE Z983 via USB.

    Added general (common) Qualcomm USB loaders for MSM8916 and MSM8936.

    Added 20 unique Qualcomm USB loaders for different vendors' devices

    Uploaded new “Live logs” into the Support Area.

    Some adjustments and improvements were made.

    Octoplus JTAG PRO Software v.1.5.4 Release Notes:
    🐙 Added “eMMC Write/Update firmware” for the following Samsung eMMC chips:

    • KLMAG2GE2A-A001 (MAG2GA)
    • KLM8G1WEMB-B011 (8WMB1R)
    • KLMAG4FE4B-B002 (MAG4FB)
    • KMJ5U000WA-B409 (J5U00A)
    • KMJ5U000WM-B409 (J5U00M)
    • KMK2U000VM-B604 (K2U00M)
    • KMK5W000VM-B312 (K5WVMB)
    • KMK5X000YM-B314 (K5XYMB)
    • KML5U000HM-B505 (L5U00M)
    • KMSJS000KA-B308 (SJS00A)
    • KMS5X000KM-B313 (S5XKMB)
    • KMV3U000LM-B304 (V3U00M)
    • KMVUS000LM-B304 (VUS00M)
    • KMVWU000LM-B900 (VWU00M)
    • KMN9W000RM-B205 (N9WRMB)
    To write/update eMMC firmware, please complete the following steps:

    1. Select "eMMC" interface option
    2. Select "Brand: eMMC_chips"
    3. Select eMMC chip part number in "Model:" software list
    4. Press "Help" button to view eMMC pinout and TP picture. Acknowledge the manual
    5. Solder all necessary wires to connect eMMC (if necessary, solder TP wire to force eMMC into Boot Mode, Product name will be displayed as 000000)
    6. Press "Connect" button to connect eMMC (if necessary, connect TP to GND)
    7. When connection is successful, release (disconnect) TP wire from GND and go to "eMMC service" tab in the software
    8. Press "Write/Update firmware" button, select proper eMMC chip from the list and press "Write/Update eMMC firmware" button
    NOTE: PLEASE DON’T SELECT INCORRECT eMMC (WITH NON MATCHING PART NUMBER)! WRITING INCORRECT FIRMWARE WILL DAMAGE YOUR EMMC!

    🐙 Box firmware has been updated! In 1.23 firmware version we have improved “eMMC Write/Update firmware” procedure. To update Box firmware automatically, it is necessary to connect the Box and only then run the software. Also, you can update Box firmware manually via “Update Box Firmware” button at “Welcome” tab in Octoplus JTAG PRO Software.
    🐙 Added support for the following models via eMMC:

    • Haier W716 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. gunit1)
    • LG D722V - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Motorola XT1550 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Motorola XT1562 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-G532M - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Sony F3111 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    🐙 Added support for the following models via USB:

    • Alcatel 5054N - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Alcatel 6055D - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Huawei Nexus 6 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Vivo Y66 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • ZZTE Z983 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    🐙 Added 20 unique Qualcomm USB Loaders for different vendors' devices (Read/Write/Full erase operations are supported):

    • Alcatel - added loader for MSM8976
    • Asus - added loaders for MSM8937
    • Coolpad - added loader for MSM8976
    • Cyan - added loaders for MSM8936 and MSM8994
    • Huawei - added loader for MSM8994
    • Lenovo - added loaders for MSM8909 and MSM8976
    • Micromax (MMX) - added loader for MSM8909
    • Oppo - added loader for MSM8976
    • Wik - added loader for MSM8909
    • Wing - added loader for MSM8937
    • ZTE - added loaders for MSM8909 and MSM8940
    🐙 Added general (common) Qualcomm USB loaders for MSM8916 and MSM8936.
    🐙 Improved “Factory Repair” operation for MediaTek CPUs-based LG devices.
    🐙 Some adjustments and improvements were made.
    🐙 Uploaded new “Live logs” into the Support Area.
    🐙 All pinouts and Repair procedures are described in the manual ("Help" button in the software).

  14. #29
    Thành Viên Lâu Năm
    Ngày tham gia
    Jun 2013
    Bài viết
    479
    Like bài viết
    0
    Được like: 13 trong 10 bài viết

    Tiêu Đề: Octoplus JTAG PRO Software Updates New


    Octoplus JTAG PRO v.1.5.5 is out! Added USB UFS support, support for Galaxy S8/S8+/Note 8 and more!

    Added support for work with UFS flash chips via USB using USB Qualcomm UFS loaders!

    Added support for Samsung SM-G930T, Samsung SM-G935V, Samsung SM-G950U, Samsung SM-G955U, Samsung SM-N950U, LG H870, Xiaomi Mi5S, Lenovo K53a48 via USB and support for LG H901, Motorola XT1642, Motorola XT1676, Samsung GT-I9301i, Sony F3112 via eMMC.

    Added 15+ unique Qualcomm USB loaders (for work with eMMC and UFS flash) for devices of different vendors.

    Uploaded new “Live logs” into the Support Area.

    Some adjustments and improvements were made.

    Octoplus JTAG PRO Software v.1.5.5 Release Notes:
    🐙 Added support for the following models via eMMC:

    • LG H901 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Motorola XT1642 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Motorola XT1676 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung GT-I9301i - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Sony F3112 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    🐙 Added support for the following models via USB:

    • Lenovo K53a48 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG H870 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-G930T - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-G935V - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-G950U - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-G955U - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-N950U - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Xiaomi Mi5S - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    🐙 Added support for work with UFS flash chips via USB using USB Qualcomm UFS loaders:

    • Added USB Qualcomm UFS loaders to Software for the following vendors’ devices:
      - LG - for MSM8996
      - Samsung - for MSM8996 and MSM8998
      - Xiaomi - for MSM8953 and MSM8996
    • Added possibility to select external USB Qualcomm UFS loader! From now on you can select external USB Qualcomm UFS loader ("*.mbn", "*.bin", "*.elf") to connect the device with UFS chip via USB. This feature will be useful, if built-in USB Qualcomm UFS loaders are not compatible with your device, or necessary loader is not included in the Software.
      To select external USB Qualcomm UFS loader, do the following: select "USB" option in Software, select "Brand: Custom Settings", select "Device (Core): Custom Loader UFS” and press “Connect” button to select loader and connect the device. Don't forget to put the device into "Qualcomm...9008" mode before.
    Read/Write/Full erase operations for each physical partition are supported with USB Qualcomm UFS loaders!

    Note: When connecting the devices by using USB Qualcomm UFS loaders, “Factory Repair” operation is currently not supported and will be added in future Software updates.
    🐙 Added 10+ unique Qualcomm USB Loaders (eMMC) for different vendors' devices (Read/Write/Full erase operations are supported):

    • Asus - added loader for MSM8953
    • Moto - added loaders for MSM8953
    • Oppo - added loaders for MSM8953
    • Vivo - added loaders for MSM8953
    • Wik - added loaders for MSM8953
    • Yu - added loader for MSM8953
    🐙 Added general (common) Qualcomm USB loader for MSM8953.
    🐙 Improved eMMC erase operation for some Samsung eMMC flash chips (thanks to Mr. andrei_d1978).
    🐙 Fixed TP picture in Software for KMKJS000VM-B309 eMMC flash chip (thanks to Mr. Jenuk).
    🐙 Uploaded new “Live logs” into the Support Area.
    🐙 Some adjustments and improvements were made.
    🐙 All pinouts and Repair procedures are described in the manual ("Help" button in the software).

  15. #30
    Thành Viên Lâu Năm
    Ngày tham gia
    Jun 2013
    Bài viết
    479
    Like bài viết
    0
    Được like: 13 trong 10 bài viết

    Tiêu Đề: Octoplus JTAG PRO Software Updates New


    Octoplus JTAG PRO v.1.5.6 is out! Added LG Factory Repair for USB UFS connection and more!

    Added LG Factory Repair support for devices connected via USB Qualcomm UFS loaders!

    Added support for Alcatel 5098O, Lenovo K10e70, Oppo A53, Stream System_B1, Stream_B3, **D 511, Wiko Ridge Fab 4G via USB and support for Alcatel 5098O, LG K550, LG P769, Motorola XT1563, Samsung SM-G900F, Sony G3112 via eMMC.

    Added new unique USB Qualcomm Loaders (UFS and eMMC) for different vendors' devices.

    Added new general (common) Qualcomm USB loaders (eMMC) for MSM8976 and MSM8992.

    Uploaded new “Live logs” into the Support Area.

    Some adjustments and improvements were made.

    Octoplus JTAG PRO Software v.1.5.6 Release Notes:
    🐙 Added support for the following models via eMMC:

    • Alcatel 5098O - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG K550 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG P769 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Motorola XT1563 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-G900F - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Sony G3112 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    🐙 Added support for the following models via USB:

    • Alcatel 5098O - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Lenovo K10e70 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Oppo A53 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Stream System_B1 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. Rebainoor)
    • Stream_B3 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. MDxavi)
    • **D 511 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Wiko Ridge Fab 4G - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. MDxavi)
    🐙 Added LG Factory Repair support for devices connected via USB Qualcomm UFS loaders! “*.tot”, “*.dz” and “*.kdz” firmwares are supported.
    🐙 Added 3 new USB Qualcomm Loaders (UFS) for MSM8996 and MSM8998 for Samsung devices.
    🐙 Added 10 unique Qualcomm USB Loaders (eMMC) for different vendors' devices (Read/Write/Full erase operations are supported):

    • LG - added loaders for MSM8992
    • Lenovo - added loader for MSM8974
    • ZTE - added loaders for MSM8940 and MSM8976
    • **D - added loader for MSM8909
    🐙 Added new general (common) Qualcomm USB loaders (eMMC) for MSM8976 and MSM8992.
    🐙 Updated help and pinouts in SRF for Samsung GT-N8000, please re-download SRF file (thanks to Mr. kosmonaft).
    🐙 Uploaded new “Live logs” into the Support Area.
    🐙 Some adjustments and improvements were made.
    🐙 All pinouts and Repair procedures are described in the manual ("Help" button in the software).

Trang 2 của 2 Đầu tiênĐầu tiên 12

Quyền viết bài

  • Bạn Không thể gửi Chủ đề mới
  • Bạn Không thể Gửi trả lời
  • Bạn Không thể Gửi file đính kèm
  • Bạn Không thể Sửa bài viết của mình
  •  
free counters