Kết quả 1 đến 4 của 4

Chủ đề: RIFF JTAG box update new here

  1. #1
    Thành Viên Lâu Năm
    Ngày tham gia
    Jun 2013
    Bài viết
    238
    Like bài viết
    0
    Được like: 8 trong 6 bài viết

    RIFF JTAG box update new here


    RIFF JTAG Manager v1.73, RIFF Firmware v1.47 – Mass storage mode support for RIFF Box



    RIFF Firmware 1.47
    —————————
    – MassStorage Mount/Dismount support for RIFFBOX1 is added.
    – Working with special eMMC vendor features (like dedicated Samsung eMMC Chip’s commands) is re-organized.
    Due to high risk of erasing User/Boot areas on the eMMC chips which are not Samsung, the Samsung chips autodetection is completely removed.
    To access special Samsung eMMC’s features (like firmware update, factory reset, etc) User must manually select Vendor Mode.
    – RIFF1 & RIFF2: Finally!!! The eMMC/SD Erase Operation (for Direct/ISP connection) finally is implemented!!!

    RIFF JTAG Manager 1.73
    —————————
    – MassStorage mount/dismount feature is reworked and improved. Now is possible to Mount/Reconfigure/Dismount the MassStorage via the same dialog.
    The MassStorage settings are read from the RIFFBOX, so it is much more convenient in case users need to mount/dismount same eMMC Area ocasianlly or to adjust eMMC connection parameters for better stability.
    – MassStorage Mount/Dismount support for RIFFBOX1 is added.
    – Working with special eMMC vendor features (like dedicated Samsung eMMC Chip’s commands) is re-organized (see the Firmware 1.47 notes)
    – Finally!!! The eMMC/SD Erase Operation (for Direct/ISP connection) is implemented!!!



    JTAG Manager 1.72
    —————————
    – New method of resurrectors grouping is added.
    Setting ISP Resurrectors shows only the ISP available DLLs; Setting ISP Resurrectors shows only the packages (PKG files); setting JTAG Resurrectors shows only the JTAG available DLLs
    Setting ALL Resurrectors shows all available DLLs same as is done in JTAG Manager 1.71 and lower.
    – Fixed bug for correct setting of the recommended SD/MMC VCCIO voltage for ISP DLLs: when model is selected, the JTAG Manager adjusts the frequency, voltage and other settings to match (if possible) those values, which are hardcoded into resurrector DLL.


    List of newest repair DLL-s with ISP support:
    – LG F240L,
    – Asus ZenFone2 (ZE551ML),
    – Huawei Honor 4C (CHM-U01) ISP
    – Nokia lumia 530 ISP
    – Samsung I9305 ISP
    – Samsung J105H ISP
    – Samsung N8000 ISP
    – Samsung P5100 ISP
    – Samsung T531 ISP
    – Samsung G361H ISP
    – Samsung I9300 ISP
    – Samsung I9300I ISP
    – Samsung I9301I ISP
    – Samsung i9070 ISP
    – Samsung i8552 ISP
    – Samsung n7000 ISP
    – Samsung i9192 ISP
    – Samsung i9060 ISP
    – Samsung G318H ISP
    – HTC Flyer ISP
    – HTC Desire 326G ISP
    – ZTE V811 ISP








    Tìm thêm kết quả:
    Chủ đề đang được nhiều người quan tâm::

  2. #2
    Thành Viên Lâu Năm
    Ngày tham gia
    Jun 2013
    Bài viết
    238
    Like bài viết
    0
    Được like: 8 trong 6 bài viết

    Tiêu Đề: RIFF JTAG box update new here


    15.09.2017 RIFF Box updates - Xiaomi REDMi 4A !



    Hello,
    Newly released ISP DLL-s:

    - Samsung A310F
    - Samsung I9190
    - Samsung J320H
    - Samsung P3100
    - Samsung T989
    - Xiaomi Redmi 4A

    Please click "Check for Updates" button to download newest set of repair DLL-s.

  3. #3
    Thành Viên Lâu Năm
    Ngày tham gia
    Jun 2013
    Bài viết
    238
    Like bài viết
    0
    Được like: 8 trong 6 bài viết

    Tiêu Đề: RIFF JTAG box update new here


    22.09.2017 RIFF Box updates - more ISP models support



    Hello,
    Following DLL-s are uploaded to support area:
    • Acer Liquid Z330
    • HTC OneM7 (PN0710000)
    • Lenovo K910
    • Samsung A500K
    • Samsung J510FN
    • Samsung N7100
    • Sony C1605
    • ZTE_V880E


    To download and install newly released updates, start RIFF JTAG Manager, go to Box Service TAB and click "Check for Updates" button.

  4. #4
    Thành Viên Lâu Năm
    Ngày tham gia
    Jun 2013
    Bài viết
    238
    Like bài viết
    0
    Được like: 8 trong 6 bài viết

    Tiêu Đề: RIFF JTAG box update new here


    RIFF JTAG Manager v1.74, RIFF Box Firmware v1.48 Turbo Mode for RIFF Box v1



    Hello dear RIFF Box users !

    We're proud to announce newest updates for RIFF Box v1 and RIFF BOX v2:

    RIFF Box Firmware v1.48
    ---------------------------
    - New SD/MMC Interface is added for RIFF1: the CPLD is used for data shifting at max 8MHz rate.
    As the eMMC signals the TDI, TMS, RTCX, and TDO signals on JTAG Connector are used. Read/Write speeds at 8MHz are aprroximately 800KB/sec - read, 365KB/s - write.

    Since the new SD/MMC Interface shares the JTAG port connector, in the JTAG Manager in the SD/MMC Interface list, it is named as 'JTAG';
    - The eMMC Read/Write speeds for GPIO (RJ-45) SD/MMC Interface are increased: 260KB/s - read, 360 KB/s - write (compare with Firmware 1.47: ~198 KB/s - read, 190 KB/s - write)
    - The eMMC Read speeds for RIFF2 (30PN) SD/MMC Interface are increased: at SD/MMC Clock Speed = 34MHz: ~9.50MB/s - read (compare with Firmware 1.47: ~7.80 MB/s - read)
    - The eMMC Write speeds for RIFF2 (30PN) SD/MMC Interface are increased more than 20x(!!!) times: at SD/MMC Clock Speed = 34MHz: 6.40MB/s - write (compare with Firmware 1.47: ~390 KB/s - write)


    RIFF JTAG Manager v1.74
    ---------------------------
    - ExtCSD Register's fields 177, 179 and 162 (BOOT_BUS_CONDITIONS, PARTITION_CONFIG, and RST_n_FUNCTION) are now displayed in eMMC connection info ("Check eMMC/SD Card" button or eMMC Advanced Actions Dialog's "Read Info from eMMC")
    - Added selection of SD/MMC H/W Interface: currently are available:
    > 1. RIFF1 SD/MMC Interface @RJ45 Connector
    > 2. RIFF1 SD/MMC Interface @JTAG Connector
    > 3. RIFF2 SD/MMC Interface @30-Pin Connector
    - Added real-time RIFFBOX status (in StatusBar): the BOX revision (RIFFBOX1/RIFFBOX2) and Firmware version
    - Improved switching on-the-fly of the JTAG Manager's specific to RIFFBOX revision parameters, immediately when the new box is connected to PC while JTAG Manager is running.
    - Schematics picture is updated (RIFF JTAG Pinout button on the Resurrection page). Schematics picture is now displayed depending on the box revision - RIFFBOX1 or RIFFBOX2.
    - Fixed buffer overrun bug in RIFF2 firmware, which caused getting chaotically corrupted data during the eMMC Read operations
    - Added one-time Start Trial Period feature for RIFF v1 users


    RIFF Remote Helper v1.10
    ----------------------------
    - Added support for RIFF v2 hardware
    - Added support for new drivers
    - Remote Helper is now included with setup package by default.


    You can download new files from RIFF Box home page:

    www.riffbox.org


    - RIFF Box v1 SD/eMMC interface via JTAG port (CPLD):


    In order to maximize read/write speed on v1 hardware, we decided to update CPLD firmware and use 20 pin port to connect SD/eMMC to RIFF Box.
    Please note that RJ45 port remains functional, too.


    - One Time Trial for v1 users:

    For those users with expired accounts, who want to test new features for free, we added optional function. Upon connecting to RIFF Box license server, You'll be prompted to activate Trial Period (15 days) which will enable Your box with all current updates and functions.

    - Support activations are permanent from now.

    All users who activate their account will get "Forever" status (Including those who activated support in last 3 months). This means that there will be no more account expiration.

Tag của Chủ đề này

Quyền viết bài

  • Bạn Không thể gửi Chủ đề mới
  • Bạn Không thể Gửi trả lời
  • Bạn Không thể Gửi file đính kèm
  • Bạn Không thể Sửa bài viết của mình
  •  
free counters